Tag Archives: gimbal

New CAME-Single

vern • July 13, 2015

Encoders	Tool-less
This technology prevent motors from losing synchronization, skipping steps and more.	32-bit controller used for the construction of high quality 3-axis camera stabilizing systems.

Design	Battery Life
The design of the CAME-SINGLE allows for one hand operation.	Batteries can operate up 10 hours when fully charged.

ENCODERS ARE OFTEN USED IN ROBOTICS FOR HIGHLY ACCURATE MONITORING OF MOTOR POSITION

YOU MIGHT BE INTERESTED IN THESE OTHER GIMBALS


CAME-MINI 2 Tool-less	CAME-8000 Tool-less	CAME-7800 Tool-less
The new MINI2 is completely tool-less which allows the operator to change camera setups....	A handheld stabilizer designed for camera systems weighing up to 11 pounds, making it suitable for...	Designed for camera systems such as Canon 5D3, Canon 5D2, Canon 7D, Panasonic GH4, and Sony A7...

Testing The CAME-Single With A Sony A7s By NextWaveDV

vision • July 13, 2015

NextWaveDV, put together this quick video of them testing out the new CAME-Single 3-Axis Gimbal with a Sony A7s!

The CAME-Single is equipped with brushless motors that have encoders. The encoders prevent motors from losing synchronization, skipping steps, decreases power consumption, increases Torque, increases the precision of the stabilization and provides important information about frame and camera angles.

Click the picture below for more information on the CAME-Single 3-Axis Gimbal.

CAME-Mini Gimbal Used By Max Snyder

vision • July 12, 2015

Max Snyder, uploaded this short video that shows test footage of him using the CAME-Mini 1 Gimbal for the first time! The wiring and electronics on the CAME-Mini 1 are completely enclosed into the frame, giving a clean professional appearance.

Click the picture below for more information on the CAME-Mini 3-Axis Gimbal.

CAME-Mini 2 Test By Philipp Reinhard

vision • July 10, 2015

Philipp Reinhard, posted this quick video of him trying out his new CAME-Mini 2 gimbal for the first time! He filmed it with the Panasonic GH4 + a Panasonic 14mm Pancake lens.

Click below for more information on the CAME-Mini 2 gimbal.

CAME-Mini 2 Review By Tom Antos

vision • July 3, 2015

Tom Antos, posted this detailed video on his first impressions of the CAME-Mini 2 gimbal. The video not only goes over the specs of the 3-axis gimbal, but it's filled with test footage of him personally using the CAME-Mini 2.

Click below for more information on the CAME-Mini 2 gimbal.

CAME-7800 Gimbal Test By Kyle SHOX Brown FILMS

vision • June 23, 2015

Check out this 3 minute video of some CAME-7800 gimbal test footage by Kyle SHOX Brown FILMS! The CAME-7800 is designed for cameras like the Canon 5Dmk3, Panasonic GH4, and Sony A7. The max weight the CAME-7800 can handle is about 6.5 lbs, so it's perfect for your DSLR type cameras.

Click below for more information on the CAME-7800 3-Axis Gimbal.